army dog tags

How much are -cheap custom lanyards

), 1/2”(12mm), 3/4”(19mm), 1”(25mm) in width. We make it all together 2mm thickness. Regarding with the circumference, it is the most important factor to choose size in our order. It is the average sizes for toddler, youth and adult. There are 4 color styles mainly for the custom wristband. They are solid, swirled, segmented and glow. Solid color looks brief and clear. There will be only one color of the solid wristband. Different color is for different meaning. White represents making poverty history. Yellow represents living strong to fight against cancer and so on. It is awesome to wear two or more solid wristbands on one wrist of different colors which shows individuality. Swirled colors is more than one color, you can put two to four colors swirled in the wristband. The colors looks like some coatings mixed half way, some stripe and smoke of color inside. The most outstanding swirled is a camouflage wristband which usually colored of black, 463c, 574c and 459c. It is especially suitable for outdoor activities. A segmented wristband gets regular color segment from one to another, they are next to each other. We can make mostly 7 colors in a segment wristband, the tipical rainbow wristband has yellow, cheap custom lanyardsblue, orange, pink, purple, red and green in it. Glowing wristband will glow in dark after absorbing light come from sunshine or lamps. Why it glows ? The reason is the glowing power which is made from some special rare earth. It absorbs, store and release light energy so it does. It glows green, blue or red yet the wristband color will not be same as glowing. The wristband color of glowing can be normally white, green, blue, red, yellow, pink and purple, but it must be light enough otherwise glowing will be hard to release. The glowing usually last 3 hours and gradually weaken. But it is not the end. It recovers when absorbing light energy again. So it is recyclable.  

have no practical use, just a fashion jewelry. This kind of handband usually reflects the beliefs and values of the wearer.   Production process First: Drawing design Drawing design is generally based on the size of the sample provided by customers to draw production drawings, generally using graphic drawing software, such as CDR or AI software production, if customers can not provide samples, we can according to customer requirements, free to cooperate with customers to complete the design and production of drawings. Second: Mould opening Mould opening is that the master of the mould works out the offset plate according to the designed drawings, then uses the offset plate to engrave the copper worker, and finally uses the copper worker to engrave the steel mold. Some of the bracelet moulds are made in a relatively high technical content and a relatively long time; generally, the opening period is calculated according to five days. With the mold, production will be fast. Third: color mixing According to the color number mixing rubber on the international Pantone color card designated by the customer, our company matches the color, and the color difference is very small. Fourth: Approval materials Each bracelet is weighed electronically and weighs about 5.5 grams. Fifth: Upper Mould Production When the mould is ready, it will be manufactured on the machine. After installing the mould, the machine needs to be heated up. A machine with nine moulds can produce about 15,00cheap custom lanyards0 pieces per day. Sixth: Quality Inspection After the bracelet is manufactured, it is necessary to check the quality of the bracelet, which mainly depends on whether the bracelet conforms to the specifications. If it does not conform to the specifications, all the bracelets will be discarded. Seventh: trimming Every bracelet will leave a residual edge when it is manufactured. After the quality inspection department has passed the inspection, the product will be sent to the later process department for trimming. (The average number of trims per person per day is about 3,000). Eighth: Inspection of finished products After trimming the edges, they are finished products. It is also necessary to send the finished product back to the product inspection department to check the trimming quality, whether there are substandard products, if any, it will be scrapped. Ninth: Packaging Department After the edge-repaired products have passed the inspection, they are packed according to the customer"s requirements. Packaging can be divided into two types: PP bag independent packaging and naked packaging. Both are 100 pieces a bag. Twenty packs and one box (2000 pieces) are usually the export standard boxes. Generally packing according to customer"s requirements. Tenth: Inspection before sealing After the packing is finished, the QC department will check the quantity. If there is no problem, it will seal the box and send it to the warehouse for delivery.   Process characteristics Silicone bracelet is made of 100% pure natural solid silicone rubber pressed by oil press, which has certain tension and softness, so it is easy to deform and recover immediately. Silicone bracelet has the characteristics of wear resistance, high temperature resistance, non-distortion, non-toxic, odorless, no side effects on human body, and is soft, non-cracking, long service life, non-irritating skin, etc. Silicone bracelet has the advantages of soft, non-cracking, non-irritating skin, etc. It"s a real green jewelry. Some functional materials, such as negative ions, germanium, titanium and far infrared, are added to the raw materials of silica gel bracelets for processing, which has certain health functions and is popular all over the world. Additional logos of companies and enterprises are more prominent, closer to people"s lives, and have a good publicity effect.             medical-id-alert-silicone-bracelets

star wars rubber band bracelet